Guide · Nonogram rules
How to play nonograms
A nonogram, also called picross, griddlers or hanjie, is a logic puzzle. The numbers beside each row and above each column tell you which squares to fill. Learn it here in six short steps, each with a small board you solve yourself.
The rules in short
- Each number is a block of filled squares in that row or column. The clue 3 1 means a block of three filled squares, then a block of one.
- Blocks appear in the same order as their numbers, left to right in a row and top to bottom in a column.
- Between two blocks there is at least one empty square. Before the first block and after the last one there can be any number of empty squares, including none.
- A row or column with the clue 0 has no filled squares at all.
- The puzzle is solved when every row and column matches its clues.
On these boards: click or tap to fill a square, right-click or use the Cross tool to cross it, and click again to clear. With a keyboard, the arrow keys move, Space fills and X crosses.
Step 1 of 6
Read the clues
Every row has a clue on its left and every column has a clue on top. A clue counts the filled squares in that line: the clue 3 means a block of three filled squares side by side.
Your turn: Fill the top row and the middle column: both have the clue 3 on a board three squares wide. Click or tap a square to fill it.
Why it works
A block of 3 in a line of 3 squares fits in only one place, so the whole line is filled. The rows with the clue 1 then already have their square, the one in the middle column, so nothing else is filled.
Step 2 of 6
Cross out empty squares
When you know a square stays empty, mark it with a cross. Crosses are your own notes: they never count as a mistake, and they show at a glance which squares are settled.
Your turn: Solve the board and put a cross on both empty squares. Right-click a square, pick the Cross tool or press X.
Why it works
The bottom row has the clue 3 and both outer columns have the clue 3, so those lines are full. The middle column has the clue 1, and its bottom square already holds that block, so the two squares above it are empty: cross them.
Step 3 of 6
Leave a gap between blocks
A clue with several numbers lists several blocks, in order from left to right or top to bottom, with at least one empty square between two blocks. The clue 0 means the line has no filled squares at all.
Your turn: Solve the board. The clue 1 1 in a line of three squares fits in only one way.
Why it works
One block, a gap and one block take 1 + 1 + 1 = 3 squares, exactly the width of the board, so both blocks sit at the ends and the middle square is empty. The middle row and the middle column have the clue 0: all empty.
Step 4 of 6
Overlap: count from both ends
Push a block as far left as it can go, then as far right. The squares it covers in both positions are filled, whatever the rest of the line does. A 4 in a line of 5 always covers the middle three squares; a 3 covers the middle one.
Your turn: Use overlap on the rows with the clues 4 and 3, then finish the board with what the columns tell you.
Why it works
Rows 1 to 3 have the clue 4: each fills its middle three squares. Row 4 has the clue 3 and fills its centre. Column 3 has the clue 5, so it is full. Column 1 has the clue 1 1 and column 5 the clue 1: they decide at which end each 4 sits.
Step 5 of 6
Switch between rows and columns
Each square you settle in a row is new information for its column, and the other way round. Solving is a loop: work through the rows, then the columns, then the rows again, until every square is settled.
Your turn: Solve the board by switching between rows and columns. Press Hint when you are stuck: it shows a square that one line already decides.
Why it works
No single line finishes this board. Start where the clues are big: rows 1 and 2 have the clue 3 in five squares, so their centres are filled. Pass that on to the columns, come back to the rows with what the columns settled, and repeat.
Step 6 of 6
Solve a whole puzzle
That is all you need. A puzzle is solved when every row and every column matches its clue. The clue numbers fade as their lines are complete, and the board is done when the last one fades.
Your turn: Solve this 5×5 nonogram on your own. It uses every technique from the steps before.
Why it works
- The second and third rows have the clue 5 on a board five squares wide, so every square in them is filled.
- The first and last columns have the clue 2. Those two squares are already filled by rows two and three, so the other squares in those columns are empty: cross them.
- The fourth row has the clue 3. Its first and last squares are crossed, so the block is the middle three squares.
- The first row has the clue 1 1 and only the middle three squares left. Two single blocks with a gap between them only fit in the second and fourth squares.
- The middle column has the clue 4. Its top square is now empty, so the block runs from the second row to the bottom. Every clue is satisfied.
Play your first puzzle
You know the rules and the main techniques. Start with today's 5×5 daily puzzle, or begin the 5×5 picross campaign at level 1.
Solving techniques
Overlap: count from both ends
Push a block as far left as it can go, then as far right. Squares that are covered in both positions must be filled. A clue of 7 in a row of 10 always fills the middle four squares, because 7 + 7 − 10 = 4. With several clues, push all of them together to each end and compare each block with itself.
Full lines
Add up the clues of a line plus one gap between each pair. If the total equals the length of the line, there is only one way to place the blocks. A clue of 4 3 2 in a row of 11 is fixed straight away: 4 + 3 + 2 + 2 gaps = 11.
Cross what cannot be filled
When a line has all of its blocks, cross every other square. Also cross squares that no block can reach, such as squares far from a short block that is already pinned near the edge. Crossed squares shorten the space left, which often unlocks the overlap technique again.
Edges and walls
A filled square next to the edge, or next to a crossed square, must be the start of a block. If the first clue is 3 and the first square is filled, the first three squares are filled and the fourth is crossed.
Switch between rows and columns
Every square you settle in a row is new information for its column. Solving is a loop: work through the rows, then the columns, and repeat until every square is settled. On harder puzzles you may need to combine several lines, or follow what a square would force and look for a contradiction.
Ready for harder puzzles? How to solve nonograms: nine techniques with examples
Stuck on a puzzle? The nonogram solver shows these techniques at work, one line at a time.
Playing on Etcher
- Mouse: left click fills a square, right click marks it with a cross, Shift + click places a dot. Drag to mark several squares at once.
- Touch: pick the fill, cross or dot tool, then tap or drag.
- Undo and redo take back moves, and the navigator can highlight rows and columns that have a forced move.
- Thicker grid lines every five squares help you count on large boards.
- Your time, mistakes and any penalty time are shown while you play.
Board sizes
Pick a size to play today's daily picross puzzle:
Or browse all nonograms by size and difficulty and community puzzles made by other players.
Prefer paper? Print nonograms from 5×5 to 30×30, with the solutions on a separate page.
Questions about picross
Names, the daily puzzles, crosses and dots, campaigns and more: see the picross and nonogram FAQ.